=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.11.07 11:06:08 =~=~=~=~=~=~=~=~=~=~=~= ۧ U-Boot 2014.04-15346-gedd0741 (Oct 27 2015 - 11:18:21) CPU: Freescale i.MX6SX rev1.2 at 792 MHz CPU: Temperature 39 C, calibration data: 0x59b50469 Reset cause: POR Board: MX6SX UDOO NEO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Found PFUZE300! deviceid 0x30, revid 0x11 Net: CPU Net Initialization Failed No ethernet found. Normal Boot Hit any key to stop autoboot: 3  2  1  0 mmc0 is current device reading uEnv.txt 409 bytes read in 9 ms (43.9 KiB/s) Running bootscript from mmc ... ** File not found /var/opt/m4/m4last.fw ** reading /m4startup.fw 47396 bytes read in 25 ms (1.8 MiB/s) ## Starting auxiliary core at 0x84000000 ... reading /zImage 4373664 bytes read in 217 ms (19.2 MiB/s) Booting from mmc ... reading dts/imx6sx-udoo-neo-hdmi-m4.dtb 39414 bytes read in 52 ms (739.3 KiB/s) Kernel image @ 0x80800000 [ 0x000000 - 0x42bca0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300c9f5 sono entrato in ldo_mode_set setto i valori valore di vddarm 19 switch to ldo_bypass mode! Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.28-udooneo-04196-gb15f827 (udoodev@udoodev-qemu) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #23 SMP PREEMPT Tue Oct 27 11:27:53 CET 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: UDoo Neo (based on imx6 SoloX) [ 0.000000] Reserved memory: reserved region for node 'm4@0x84000000': base 0x84000000, size 8 MiB [ 0.000000] cma: CMA: reserved 320 MiB at aa000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] PERCPU: Embedded 8 pages/cpu @bf63c000 s9152 r8192 d15424 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257794 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 rw uart_from_osc clk_ignore_unused cpuidle.off=1 consoleblank=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 690208K/1039360K available (5018K kernel code, 332K rwdata, 5656K rodata, 260K init, 384K bss, 349152K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc0000000 - 0xff000000 (1008 MB) [ 0.000000] lowmem : 0x80000000 - 0xbff00000 (1023 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x80a74c58 (10676 kB) [ 0.000000] .init : 0x80a75000 - 0x80ab63c0 ( 261 kB) [ 0.000000] .data : 0x80ab8000 - 0x80b0b330 ( 333 kB) [ 0.000000] .bss : 0x80b0b33c - 0x80b6b664 ( 385 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L310 cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32030000, Cache size: 256 kB [ 0.000000] Switching to timer-based delay loop [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns [ 0.000631] clocksource_of_init: no matching clocksources found [ 0.000778] Console: colour dummy device 80x30 [ 0.000801] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.000815] pid_max: default: 32768 minimum: 301 [ 0.000950] Security Framework initialized [ 0.001021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001033] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006171] device-tree: Duplicate name in /soc/aips-bus@02200000/spba-bus@02200000/lcdif@02220000, renamed to "display#1" [ 0.007364] Initializing cgroup subsys devices [ 0.007380] Initializing cgroup subsys freezer [ 0.007423] CPU: Testing write buffer coherency: ok [ 0.007696] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007734] Setting up static identity map for 0x804c70b8 - 0x804c7110 [ 0.041934] Brought up 1 CPUs [ 0.041948] SMP: Total of 1 processors activated. [ 0.041957] CPU: All CPU(s) started in SVC mode. [ 0.042562] devtmpfs: initialized [ 0.045803] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.046135] pinctrl core: initialized pinctrl subsystem [ 0.046472] regulator-dummy: no parameters [ 0.063860] NET: Registered protocol family 16 [ 0.071157] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.071794] Use WDOG1 as reset source [ 0.080141] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered [ 0.080487] vdd1p1: 800 <--> 1375 mV at 1100 mV [ 0.080845] vdd3p0: 2800 <--> 3150 mV at 3000 mV [ 0.081171] vdd2p5: 2100 <--> 2875 mV at 2500 mV [ 0.081511] cpu: 725 <--> 1450 mV [ 0.081843] vddpcie-phy: 725 <--> 1450 mV [ 0.082178] vddsoc: 725 <--> 1450 mV [ 0.083954] syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered [ 0.086387] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered [ 0.086794] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered [ 0.091607] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.091621] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.092550] imx6sx-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.093389] 20dc000.gpc supply pu not found, using dummy regulator [ 0.094105] MU is ready for cross core communication! [ 0.100196] bio: create slab at 0 [ 0.101255] vref-3v3: 3300 mV [ 0.101520] PSU-5V0: 5000 mV [ 0.101777] usb_otg1_vbus: 5000 mV [ 0.102041] usb_otg2_vbus: 5000 mV [ 0.102292] wlan-en-regulator: 1800 mV [ 0.103094] SCSI subsystem initialized [ 0.103389] usbphy_nop1.12 supply vcc not found, using dummy regulator [ 0.104656] i2c i2c-0: IMX I2C adapter registered [ 0.105346] i2c i2c-1: IMX I2C adapter registered [ 0.106046] i2c i2c-2: IMX I2C adapter registered [ 0.107172] i2c i2c-3: IMX I2C adapter registered [ 0.107278] Linux video capture interface: v2.00 [ 0.107361] pps_core: LinuxPPS API ver. 1 registered [ 0.107370] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.107393] PTP clock support registered [ 0.107903] Advanced Linux Sound Architecture Driver Initialized. [ 0.108899] Loading modules backported from Linux version v4.1.7-0-g0c5c1f1 [ 0.108911] Backport integrated by backports.git v4.1.1-1-0-g8286954 [ 0.109082] Switched to clocksource mxc_timer1 [ 0.119246] NET: Registered protocol family 2 [ 0.120109] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.120191] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.120315] TCP: Hash tables configured (established 8192 bind 8192) [ 0.120385] TCP: reno registered [ 0.120401] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.120440] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.120714] NET: Registered protocol family 1 [ 0.121043] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.122583] Bus freq driver module loaded [ 0.123330] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.130007] VFS: Disk quotas dquot_6.5.2 [ 0.130301] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.132122] msgmni has been set to 1988 [ 0.135880] io scheduler noop registered [ 0.135895] io scheduler deadline registered [ 0.135936] io scheduler cfq registered (default) [ 0.136413] imx-weim 21b8000.weim: Driver registered. [ 0.137883] MIPI DSI driver module loaded [ 0.269897] tda19988 2-0034: Sucessfully initialised chip revision 301 [ 0.280749] mxsfb 2220000.lcdif: failed to find mxc display driver [ 0.281269] DISPLAY: Power-on latency exceeded, new value 484334 ns [ 0.282710] DISPLAY: Power-off latency exceeded, new value 25334 ns [ 0.298669] Console: switching to colour frame buffer device 160x45 [ 0.342712] tda19988 2-0034: Matching CEA mode is 4 for fb mode 1280x720-60 [ 0.396396] mxsfb 2220000.lcdif: initialized [ 0.399263] imx-sdma 20ec000.sdma: no iram assigned, using external mem [ 0.399567] imx-sdma 20ec000.sdma: no event needs to be remapped [ 0.399794] imx-sdma 20ec000.sdma: loaded firmware 3.1 [ 0.402685] imx-sdma 20ec000.sdma: initialized [ 0.404328] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 0.404902] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 0.404915] pfuze100-regulator 0-0008: pfuze3000 found. [ 0.406334] SW1A: 700 <--> 1475 mV at 1175 mV [ 0.407694] SW1B: 700 <--> 1475 mV at 1175 mV [ 0.408453] SW2: 1500 <--> 1850 mV at 1800 mV [ 0.409225] SW3: 900 <--> 1650 mV at 1350 mV [ 0.409993] SWBST: 5000 <--> 5150 mV at 5000 mV [ 0.410742] VSNVS: 1000 <--> 3000 mV at 3000 mV [ 0.410930] VREFDDR: 750 mV [ 0.411675] VLDO1: 1800 <--> 3300 mV at 1800 mV [ 0.412423] VLDO2: 800 <--> 1550 mV at 1500 mV [ 0.413188] VCCSD: 2850 <--> 3300 mV at 3150 mV [ 0.413954] V33: 2850 <--> 3300 mV at 3150 mV [ 0.414698] VLDO3: 1800 <--> 3300 mV at 1800 mV [ 0.415888] VLDO4: 1800 <--> 3300 mV at 1800 mV [ 0.416202] Serial: IMX driver [ 0.416507] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 1500000) is a IMX [ 1.213764] console [ttymxc0] enabled [ 1.218279] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 1500000) is a IMX [ 1.227351] serial: Freescale lpuart driver [ 1.232849] imx sema4 driver is registered. [ 1.237427] Install mcc tty driver! [ 1.241024] [ 1.241024] A9 mcc prepares run, MCC version is 002.000 [ 1.247806] IMX MCC TTY driver module loaded [ 1.252177] [drm] Initialized drm 1.1.0 20060810 [ 1.257233] [drm] Initialized vivante 1.0.0 20120216 on minor 0 [ 1.267508] loop: module loaded [ 1.274052] 2188000.ethernet supply phy not found, using dummy regulator [ 1.299552] pps pps0: new PPS source ptp0 [ 1.308496] libphy: fec_enet_mii_bus: probed [ 1.313514] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.319916] mousedev: PS/2 mouse device common for all mice [ 1.326344] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0 [ 1.336801] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed [ 1.344152] i2c /dev entries driver [ 1.348391] IR NEC protocol handler initialized [ 1.353010] IR RC5(x) protocol handler initialized [ 1.357811] IR RC6 protocol handler initialized [ 1.362376] IR JVC protocol handler initialized [ 1.366913] IR Sony protocol handler initialized [ 1.371553] IR RC5 (streamzap) protocol handler initialized [ 1.377131] IR SANYO protocol handler initialized [ 1.381855] IR MCE Keyboard/mouse protocol handler initialized [ 1.388961] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) [ 1.397478] sdhci: Secure Digital Host Controller Interface driver [ 1.403698] sdhci: Copyright(c) Pierre Ossman [ 1.408063] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.414750] mmc0: no vqmmc regulator found [ 1.418868] mmc0: no vmmc regulator found [ 1.459110] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.468864] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.482571] mmc2: no vqmmc regulator found [ 1.549429] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.565837] mmc0: new high speed SDHC card at address e624 [ 1.571862] mmcblk0: mmc0:e624 SU08G 7.40 GiB [ 1.577862] mmcblk0: p1 p2 [ 1.609103] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.616778] galcore: clk_get 2d core clock failed, disable 2d/vg! [ 1.626049] Galcore version 5.0.11.25762 [ 1.649506] sdhci-esdhc-imx 2198000.usdhc: card claims to support voltages below defined range [ 1.691474] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 1.710338] mmc2: new high speed SDIO card at address 0001 [ 1.873309] fsl-asrc 2034000.asrc: driver registered [ 1.884076] imx-tda19988 sound.24: tda19988-codec <-> 202c000.ssi mapping ok [ 1.892103] nf_conntrack version 0.5.0 (15904 buckets, 63616 max) [ 1.898975] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.904415] TCP: cubic registered [ 1.907744] NET: Registered protocol family 17 [ 1.912274] Key type dns_resolver registered [ 1.917283] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) [ 1.939129] failed to register cpuidle driver [ 1.943538] A9-M4 sema4 num 6, A9-M4 magic number 0x12345678 - 0x12345678. [ 1.951034] VLDO2: disabling [ 1.954389] SWBST: disabling [ 1.957302] usb_otg2_vbus: disabling [ 1.961092] usb_otg1_vbus: disabling [ 1.964727] PSU-5V0: disabling [ 1.967830] vref-3v3: disabling [ 1.971366] regulator-dummy: disabling [ 1.975724] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.990975] clk: Not disabling unused clocks [ 1.995294] ALSA device list: [ 1.998285] #0: imx-audio-tda19988 [ 4.181536] random: nonblocking pool is initialized [ 5.345407] EXT4-fs (mmcblk0p2): recovery complete [ 5.352761] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.361287] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.368561] devtmpfs: mounted [ 5.372015] Freeing unused kernel memory: 260K (80a75000 - 80ab6000) [ 6.000793] init: plymouth-upstart-bridge main process (84) terminated with status 1 [ 6.008630] init: plymouth-upstart-bridge main process ended, respawning [ 6.096168] init: plymouth-upstart-bridge main process (94) terminated with status 1 [ 6.108575] init: plymouth-upstart-bridge main process ended, respawning [ 6.121930] init: ureadahead main process (87) terminated with status 5 [ 6.171650] init: plymouth-upstart-bridge main process (98) terminated with status 1 [ 6.183051] init: plymouth-upstart-bridge main process ended, respawning [ 6.530798] init: mounted-proc main process (111) terminated with status 1 [ 9.299160] (stk) :ldisc installation timeout [ 10.299145] (stk) : timed out waiting for ldisc to be un-installed * Starting Mount filesystems on boot[ OK ] * Stopping Send an event to indicate plymouth is up[ OK ] * Starting Signal sysvinit that the rootfs is mounted[ OK ] * Starting Clean /tmp directory[ OK ] * Stopping Clean /tmp directory[ OK ] * Starting Populate and link to /run filesystem[ OK ] * Stopping Populate and link to /run filesystem[ OK ] * Stopping Trac k if upstart is running in a container[ OK ] * Starting Initialize or finalize resolvconf[ OK ] * Starting set console keymap[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Bridge udev events into upstart[ OK ] * Stopping set console keymap[ OK ] * Starting Signal sysvinit that remote filesystems are mounted[ OK ] * Starting device node and kernel event manager[ OK ] * Starting load modules from /etc/modules[ OK ] * Starting cold plug devices[ OK ] * Starting log initial device creation[ OK ] * Stopping load modules from /etc/modules[ OK ] * Stopping Read required files in advance (for other mountpoints)[ OK ] * Stopping Read required files in advance (for other mountpoints)[ OK ] * Starting configure network device security[ OK ] * Starting set console font[ OK ] * Stopping set console font[ OK ] * Starting userspace bootsplash[ OK ] * Starting configure network device[ OK ] * Stopping userspace bootsplash[ OK ] * Starting Send an event to indicate plymouth is up[ OK ] * Starting Signal sysvinit that local filesystems are mounted[ OK ] * Starting USB Gadget Script[ OK ] * Stopping Mount filesystems on boot[ OK ] * Stopping Send an event to indicate plymouth is up[ OK ] [ 11.409125] (stk) :ldisc installation timeout * Starting flush early job output to logs[ OK ] * Starting D-Bus system message bus[ OK ] * Stopping flush early job output to logs[ OK ] * Starting SystemD login management service[ OK ] * Starting configure network device security[ OK ] * Starting bluetooth daemon[ OK ] [ 12.409143] (stk) : timed out waiting for ldisc to be un-installed * Starting Mount network filesystems[ OK ] * Starting Failsafe Boot Delay[ OK ] * Starting system logging daemon[ OK ] * Starting mDNS/DNS-SD daemon[ OK ] * Stopping Mount network filesystems[ OK ] [ 13.519165] (stk) :ldisc installation timeout * Starting CUPS printing spooler/server[ OK ] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ] * Starting configure network device security[ OK ] * Stopping Failsafe Boot Delay[ OK ] * Starting configure network device[ OK ] [ 14.519169] (stk) : timed out waiting for ldisc to be un-installed * Starting USB Gadget Serial[ OK ] * Starting System V initialisation compatibility[ OK ] * Starting configure network device security[ OK ] * Setting up X socket directories...  * Starting configure network device[ OK ] [ OK ] * Starting configure network device security[ OK ] * Stopping Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ] * Stopping System V initialisation compatibility[ OK ] [ 15.629155] (stk) :ldisc installation timeout * Starting cups-browsed - Bonjour remote printer browsing daemon[ OK ] * Starting network connection manager[ OK ] (stk) : timed out waiting for ldisc to be un-installed * Loading cpufreq kernel modules...  [ OK ] * Starting System V runlevel compatibility[ OK ] * Starting regular background program processing daemon[ OK ] * Starting anac(h)ronistic cron[ OK ] * Starting Freescale autohdmi utility[ OK ] * Starting save kernel messages[ OK ] * Starting configure network device security[ OK ] * Starting OpenSSH server[ OK ] * CPU0...  * Stopping save kernel messages[ OK ] (stk) :ldisc installation timeout * Stopping anac(h)ronistic cron[ OK ] * CPUFreq Utilities: Setting ondemand CPUFreq governor...  [ OK ] [ 18.739201] (stk) : timed out waiting for ldisc to be un-installed * Stopping Restore Sound Card State[ OK ] * Setting sysfs variables...  * Starting configure network device[ OK ] * Starting configure virtual network devices[ OK ] [ OK ] Starting very small Busybox based DHCP server: Starting /usr/sbin/udhcpd... udhcpd. [ 19.849149] (stk) :ldisc installation timeout UIM SYSFS Node Found at /sys/./devices/soc0/kim.21/install Starting uim-sysfs daemon. uim:@ main uim:install = /sys/./devices/soc0/kim.21/install uim:dev_name = /sys/./devices/soc0/kim.21/dev_name uim:baud_rate = /sys/./devices/soc0/kim.21/baud_rate uim:flow_cntrl = /sys/./devices/soc0/kim.21/flow_cntrl uim:begin (stk) : timed out waiting for ldisc to be un-installedpolling... [ 20.858058] Bluetooth: st_register failed -22 * Starting NTP server ntpd  [ OK ] Ubuntu 14.04.3 LTS udooneo ttymxc0 default username:password is [udooer:udooer] udooneo login: [ 40.639745] systemd-udevd[242]: timeout 'accelerometer /devices/virtual/input/input1' [ 40.699268] systemd-udevd[245]: timeout 'accelerometer /devices/virtual/input/input3' Ubuntu 14.04.3 LTS udooneo ttymxc0 default username:password is [udooer:udooer] udooneo login: Ubuntu 14.04.3 LTS udooneo ttymxc0 default username:password is [udooer:udooer] udooneo login: Ubuntu 14.04.3 LTS udooneo ttymxc0 default username:password is [udooer:udooer] udooneo login: Ubuntu 14.04.3 LTS udooneo ttymxc0 default username:password is [udooer:udooer] udooneo login: Ubuntu 14.04.3 LTS udooneo ttymxc0 default username:password is [udooer:udooer] udooneo login: udooer Password: Last login: Thu Jan 1 00:00:31 UTC 1970 on ttymxc0 Welcome to Ubuntu 14.04.3 LTS (GNU/Linux 3.14.28-udooneo-04196-gb15f827 armv7l) * Documentation: https://help.ubuntu.com/ udooer@udooneo:~$ ssudo shutdown -h now [sudo] password for udooer:  Broadcast message from udooer@udooneo (/dev/ttymxc0) at 0:17 ... The system is going down for halt NOW! udooer@udooneo:~$ wait-for-state stop/waiting * Stopping rsync daemon rsync  [ OK ] Stopping very small Busybox based DHCP server: Stopped /usr/sbin/udhcpd (pid 949). udhcpd. UIM SYSFS Node Found at /sys/./devices/soc0/kim.21/install Stopping uim-sysfs daemon. * Asking all remaining processes to terminate...  [ OK ] * Killing all remaining processes...  [fail]