Introduction

Here are a few notes when I tried a prebuilt Yocto Project 2.0 core-image-full-cmdline image on my UDOO Neo.

References

Step-by-step instructions

  • Download Yocto image for UDOO NEO - 20151109191206

  • Unzip the *.rootfs.sdcard.gz file $ gunzip core-image-full-cmdline-udooneo-20151109191206.rootfs.sdcard.gz

  • Write the *.rootfs.sdcard file (i.e. on Windows, use Win32DiskImager) onto a blank Micro SD

  • Insert the Micro SD

  • Watch U-Boot and Linux console messages on the debug serial

  • When getting the udooneo login prompt, login as root

    Poky (Yocto Project Reference Distro) 2.0 udooneo /dev/ttymxc0
    
    udooneo login: root
    root@udooneo:~#
    

Some commands to inspect the target

df -h

root@udooneo:~# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/root       128M   94M   25M  80% /
devtmpfs        338M     0  338M   0% /dev
tmpfs           498M  156K  498M   1% /run
tmpfs           498M  168K  498M   1% /var/volatile
root@udooneo:~#

cat /proc/cpuinfo

root@udooneo:~# cat /proc/cpuinfo
processor       : 0
model name      : ARMv7 Processor rev 10 (v7l)
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc09
CPU revision    : 10

Hardware        : Freescale i.MX6 SoloX (Device Tree)
Revision        : 0000
Serial          : 0000000000000000
root@udooneo:~#

cat /proc/version

root@udooneo:~# cat /proc/version
Linux version 3.14.28_1.0.0_ga-udooboard+gb15f827 (chris@quadros) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Thu Nov 5 22:02:15 CET 2015
root@udooneo:~#